We are one of the renowned manufacturers and suppliers of a comprehensive assortment of Temperature and Process Scanner that caters to wide applications of industries. Our range is manufactured as per advance micro-controller techniques.
We are eminent manufacturer and supplier of Temperature Scanner. There is a provision for a maximum of RTD inputs and Relay outputs. These scanners are mainly used for measuring the winding & bearing temperatures of Turbine and Alternators. Protocol Interface is available to connect the scanner to any PLC/ DCS/ SCAD. Three numbers 4-20 ma retransmission outputs are available, which can be configured for Max temperature value among the selected channel in different groups/ individual channel’s temperature value with channel number. Dot Matrix/ Thermal Printer can be connected to the Scanner and periodic print outs can be obtained
32 RTD inputs
16 Relay outputs
Optional RS485 Communication
MODBUS Protocol Interface
4-20 ma retransmission outputs
We offer Process Scanner to our clients with following specifications. It works on Micro controller technology. Password protection is applied for changing the settings. Trip settings are also available with channel wise Alarm.
Low cost exclusive RTD input scanner
Maximum 12 channel inputs & 8 relay outputs
Grouping of channels, relay assignments field programmable
Tri color led for individual channel Alarm/ Trip/ Open status
Optional RS485/ RS232 comm port
Universal SMPS: 90 to 270 V AC/DC or 24V DC for unit operation
Settings stored in EEPROM
We offer Universal Input Scanner, which can accept various process inputs such as Thermocouples/ RTD sensors. Each channel can be of different type and the type of input can be programmed through the front keypad. Thermocouple input is built in the case of temperature inputs from thermocouples/ RTD the scanner directly displays the temperature values. In the case of 4-20 mA inputs from transmitters, the measuring range can be programmed for each channel and the scanner displays the values in engineering units for respective channels
Thermocouples/ RTD sensors: 4-20 mA signals
Cold Junction Compensation
If the inputs are Universal type, the scanner can accept 16 Channels input and if the inputs are either TC or 4-20 mA, then the scanner can accept 32 channels
There is provision for 16 Relay Outputs
Optional RS485 Communication with MOD BUS Protocol Interface is available to connect the scanner to any PLC/ DCS/ SCADA
Dot Matrix/ Thermal Printer can be connected to the Scanner and periodic print outs can be obtained
· The PTRh-LC is a low cost High Accurate Module for measurement of
Temperature and Humidity in Furnace, Oven, Deep Frrezers and Laboratory items.
With Sleek outlook, the module can be fitted anywhere and with a pair of wire for Communication plut pair of wire for Power input we can get the information about the Temperature and Humidity.
· Temperature sensor in a plastic casing made especially for indoor temperature measurement.
· Temperature range -50 to +75°C; Humidity : 0 – 98%
· 0.1 °C resolution for Temperature ; 2 – 3 % for Rh
· Accuracy ±0,5 °C from -10 to +85 °C, otherwise ±2 °C
· Communication line RS485 - up to 32 devices can be connected on a single bus (even more when a repeater is used)
· ModBus RTU protocols supported
· 6-12V DC power - low power requirements (typically 10 mA)
PTRh-LC Module is a digital temperature sensor. It measures temperature within the range from -50°C to +75°C and Humidity with range of 0 – 98% and sends the measured through RS485. The PTRh-LC Module has a very low consumption and communicates via an RS485 bus line using the MODBUS protocol. These features enable connecting more sensors with a four-wire bus line containing an RS485 link and supply cable to the distance of up to 1200m